| Specifications of Monel 400 fasteners: |
| Grade |
400,K500,etc. |
| Standard |
ASTM F467 |
| Length |
3 mm to 200 mm, customizable
|
| Size |
M3 – M56 | 3/6″ to 2″ | Custom Sizes |
| Screw Type |
Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc. |
| Bolts Types |
Hex Head Bolts, Hex Bolts, Square Bolts, Eye Bolts, T Bolts, U Bolts, Lag Bolts, Counter sunk Bolts etc. |
| Washer Types |
Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc. |
| Studs Types |
Double Ended Studs, Threaded Tod, Tie Bars, Tie Rodsetc. |
| Nut Types |
Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, Eye Nut, Lock Nut etc. |
| Mill Test Certificate |
EN 10204 3.1 or EN 10204 3.2 |
| Equivalent Grades of Monel 400 FASTENER : |
| STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
BS |
GOST |
| Monel 400 |
2.4360 |
N04400 |
NW4400 |
NA13 |
МНЖМц 28-2,5-1,5 |
| CHEMICAL COMPOSITION OF Monel 400 FASTENER: |
| Grade |
Fe |
Ni |
Mn |
Cu |
Si |
C |
S |
| 400 |
1.0-2.5 |
63.0 |
2.0 |
28.0-34.0 |
0.50 |
0.3 |
0.02 |
| Mechanical Properties of Monel 400 FASTENER : |
| Element |
Density |
Melting Point |
Tensile Strength |
Yield Strength |
Elongation |
| 400 |
8.8 g/cm3 |
1350 °C |
Psi – 80,000 , MPa – 550 |
Psi – 35,000 , MPa – 240 |
40% |
| Monel Alloy FASTENER Types: |
 |
 |
 |
| Monel 400 Caps |
Monel 400 Nuts |
Monel 400 Hex Bolts |
 |
 |
 |
| Monel 400 Washers |
Monel 400 Dome Nut |
Monel 400 Wing Nut |
| SASA ALLOY'S Quality Assurance: |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test
\n
Previous: Incoloy 825 Fasteners
Next: Precision Soft Magnetic Alloy 1j79 Wire
