Incoloy 825 Fasteners

Short Description:

Specifications of Incoloy 825 Fasteners: Grade 800,825,etc. Standard ASTM B425 Length 3 mm to 200 mm, customizable Size M3 – M56 | 3/6″ to 2″ | Custom Sizes Screw Type Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc. Bolts Types Hex Head Bolts, Hex Bolts, Square Bolts, Eye Bolts, T…

Grade:: Incoloy 825
Standard:: ASTM B 166
Surface:: Blackening, Cadmium zinc plated
Diameter:: Not applicable

Send email to us

Product Detail

Product Tags

Specifications of Incoloy 825 Fasteners:

Grade	800,825,etc.
Standard	ASTM B425
Length	3 mm to 200 mm, customizable
Size	M3 – M56 \| 3/6″ to 2″ \| Custom Sizes
Screw Type	Threaded Screw, Hex Head Screw, Socket Head Screw, Socket Set Screw, Blind Rivet, Concrete Screw, Shoulder Screw, Anchor Screw, Panel Screw, Machine Screw etc.
Bolts Types	Hex Head Bolts, Hex Bolts, Square Bolts, Eye Bolts, T Bolts, U Bolts, Lag Bolts, Counter sunk Bolts etc.
Washer Types	Lock Washer, Machine Washers, Star Washers, Sealing Washer, Split Washer etc.
Studs Types	Double Ended Studs, Threaded Tod, Tie Bars, Tie Rodsetc.
Nut Types	Coupling Nut, Hex Head Nut, Wing Nut, Square Nut, Panel Nut, T Nut, Acorn Nuts, Dome Nut, Eye Nut, Lock Nut etc.
Mill Test Certificate	EN 10204 3.1 or EN 10204 3.2

Equivalent Grades of Incoloy 825 fasteners :

STANDARD	WERKSTOFF NR.	UNS	JIS	BS	GOST	AFNOR	EN
Incoloy 825	2.4858	N08825	NCF825	NA16	ЭП703	NFE30C20DUM	NiCr21Mo

CHEMICAL COMPOSITION OF Incoloy 825 FASTENER:

Grade	Fe	Ni	Mn	Cu	Si	C	S	Cr
825	22.0	38.0-46.0	1.0	1.5-3.0	0.50	0.05	0.03	19.5-23.5

Mechanical Properties of Incoloy Alloy 825 FASTENER :

Element	Density	Melting Point	Tensile Strength	Yield Strength	Elongation
825	8.14 g/cm3	1400 °C	Psi – 80,000 , MPa – 550	Psi – 32,000 , MPa – 220	30%

Incoloy FASTENER Types:


Incoloy Alloy 825 Caps	Incoloy Alloy 825 Thread Stud	Incoloy Alloy 825 Hex Bolts

Incoloy Alloy 825 Washers	Incoloy Alloy 825 Dome Nut	Incoloy Alloy 825 Wing Nut

SASA ALLOY'S Quality Assurance:

1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test

Why Choose Us: