| Specifications of Incoloy 800 800h 800ht Pipe Tube: |
SASA ALLOY is engaged in offering Incoloy 800/ 800h/ 800ht Pipes and Tubes, ASTM B514 Incoloy 800 Welded Pipes that are manufactured using superior quality components to withstand high temperatures. We also offer these seamless & welded pipes & tubes in different specifications. These pipes & tubes are widely used in various applications industry like oil and gas, petrochemical, medicine, food, paper, machinery, natural gas etc. We can meet most ASME, ASTM, and other specifications, and can cross-reference to most international standards. Sasa alloy offer Incoloy pipes and tubes in standards specifications at the most competitive prices.
| Size |
15 NB to 150 NB IN |
| Type |
Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Standards |
ASTM B407, ASTM B407, ASTM B514, ASTM B515, ASME SB-407, ASME SB-407, ASME SB-514, ASME SB 515, UNS N08800/10/11 / Werkstoff Nr. 1.4876/4958/59 |
| End |
Plain End, Beveled End, Treaded. |
| Length |
Single Random, Double Random & Cut Length. |
| Form |
Round, Square, Rectangular, Hydraulic Etc. |
| Incoloy 800 800h 800ht Grade: |
| STANDARD |
WERKSTOFF NR. |
UNS |
JIS |
AFNOR |
BS |
GOST |
EN |
OR |
| Incoloy 800 |
1.4876 |
N08800 |
NCF 800 |
Z8NC32-21 |
NA 15 |
ЭИ670 |
X10NiCrAlTi32-20 |
XH32T |
| Incoloy 800H |
1.4958 / 1.4876 |
N08810 |
NCF 800H |
Z8NC33-21 |
NA 15(H) |
ЭИ670 |
X5NiCrAlTi31-20 |
XH32T |
| Incoloy 800HT |
1.4859 / 1.4876 |
N08811 |
NCF 800HT |
- |
NA 15(HT) |
ЭИ670 |
X8NiCrAlTi32-21 |
XH32T |
| Incoloy 800 800h 800ht Pipe Chemical Composition: |
| Incoloy |
800 |
800H |
800HT |
| Ni |
30-35 |
30-35 |
30-35 |
| Fe |
39.5 min |
39.5 min |
39.5 min |
| Cr |
19-23 |
19-23 |
19-23 |
| Cu |
0.75 max |
0.75 max |
0.75 max |
| Ti |
0.15-0.60 |
0.15-0.60 |
0.25-0.60 |
| Al |
0.15-0.60 |
0.15-0.60 |
0.85-1.20 |
| C |
0.1 max |
0.05-0.1 |
0.06-0.1 |
| Mn |
1.5 max |
1.5 max |
1.5 max |
| S |
0.015 max |
0.015 max |
0.015 max |
| Si |
1.0 max |
1.0 max |
1.0 max |
| Mechanical & Physical Properties: |
| Density |
7.94 g/cm3 |
| Melting Point |
1385 °C (2525 °F) |
| Tensile Strength |
Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2%Offset) |
Psi – 30,000 , MPa –205 |
| Elongation |
30 % |
Pipe ends, surfaces and bundles are protected and secured to reduce contamination, impact and movement during warehouse handling and export shipment.
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. SASA ALLOY's pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
Previous: Inconel 625 Pipe Tube
Next: Incoloy 825 Pipe Tube
