ASTM B163 2.4816 Inconel Tubes Pipes
ASTM B163 is the standard specification for seamless nickel and nickel alloy condenser and heat-exchanger tubes, and it covers Inconel Alloy 600.
| Specifications of ASTM B163 2.4816 Inconel Tubes Pipes: |
| Grade | ASTM B163 2.4816 Inconel Tubes Pipes |
| Standard | ASTM B163 ASME SB-167 ASME SB-829 ASME SB-775 ASME SB-725 |
| Size | 15 NB to 150 NB IN |
| Type | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Form | Round, Square, Rectangular, Hydraulic Etc. |
| Length | Single Random, Double Random & Cut Length. |
| End | Plain End, Beveled End, Treaded |
| TYPE OF ASTM B163 2.4816 Inconel Tubes Pipes: |
 |
 |
 |
|
|
|
|
|
|
|
|
|
| EQUIVALENT GRADES OF ASTM B163 2.4816 Inconel Tubes Pipes: |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| INCONEL 600 | 2.4816 | N06600 | NCF600 | NA 14 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe | ЭИ868 |
| CHEMICAL COMPOSITION OF ASTM B163 2.4816 Inconel Tubes Pipes: |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| INCONEL 600 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
| ASTM B163 2.4816 Inconel Tubes Pipes Mechanical & Physical Properties : |
|
Density |
8.47 g/cm3 |
|
Melting Point |
1413 °C (2580 °F) |
|
Tensile Strength |
Psi – 95,000 , MPa – 655 |
|
Yield Strength (0.2%Offset) |
Psi – 45,000 , MPa – 310 |
|
Elongation |
40 % |
| Physical Constants and Thermal Properies: |
| Property | Imperial Units | Metric Units |
|---|---|---|
| Density | 0.306 lb/in³ | 8.47 g/cm³ |
| Melting Range | 2470 – 2575 °F | 1354 – 1413 °C |
| Specific Heat | 0.106 Btu/lb·°F | 444 J/kg·°C |
| Curie Temperature | -192 °F | -124 °C |
| Permeability at 200 Oersted (15.9 kA/m) | 1.010 | – |
| Coefficient of Expansion (70–200°F / 21–93°C) | 7.4 × 10⁻⁶ in/in·°F | 13.3 µm/m·°C |
| Thermal Conductivity | 103 Btu·in/ft²·h·°F | 14.9 W/m·°C |
| Electrical Resistivity | 620 ohm·circ mil/ft | 1.03 µΩ·m |
| Typicat Mechanical Properties: |
| Property | Imperial Units | Metric Units |
|---|---|---|
| Tensile Strength | 95 ksi | 655 MPa |
| Yield Strength (0.2% Cƒ set) | 45 ksi | 310 MPa |
| Elongation | 40% | — |
| Why Choose Us: |
1. You can get the perfect material according to your requirement at the least possible price. 2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical. 3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement) 4. We guarantee to give a response within 24hours(usually in the same hour) 5. Provide SGS TUV report. 6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations. 7.Provide one-stop service.
| Packing: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
