Nimonic 80/80A flanges include various types such as weld neck, slip-on, blind, socket weld, and threaded flanges. These flanges are used to connect pipes, valves, and other equipment in high-temperature and high-pressure applications.Nimonic 80/80A flanges are manufactured according to various international standards such as ASTM B564 for nickel alloy flanges. These standards specify dimensions, tolerances, and material requirements for flanges.
| Specifications of Nimonic 80 Flanges: |
| Grade |
Nimonic 80 / UNS N07080 |
| Dimensions |
ANSI / ASME B16.5, B16.47 Series A & B, B.16.48, BS4504, BS10, DIN, EN-1092, MSS SP44 |
| Size |
1/2″ – 48″ (15NB – 1200NB) |
| Class / Pressure Rating |
150 Class, 300 Class, 600 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64, etc. |
| Form |
Slip on Flanges (SORF), Threaded Flanges, Weld neck Flanges (WNRF), Blind Flanges, Socket weld Flanges, Lap Joint Flanges, Ring Type Joint Flanges, Spectacle Blind Flanges, Spacer Ring Flanges, Long weld Neck Flanges, Nipo Flange, Nipolet Flanges, Plate Flanges, Flat Flange, Orifice Flanges, Forged Flanges |
| Flange Face Type |
Flat Face (FF), Raised Face (RF), Ring Type Joint(RTJ) |
| TYPE OF Nimonic 80 Flanges: |
- •Nimonic 80 WNRF Flanges
- •UNS N07080 WNRF Flanges
- •ASTM B637 Nimonic 80 WNRF Flanges
- •ASME SB637 Nimonic Alloy 80 WNRF Flanges
|
- •Nimonic 80 BLRF Flanges
- •UNS N07080 BLRF Flanges
- •ASTM B637 Nimonic 80 BLRF Flanges
- •ASME SB637 Nimonic Alloy 80 BLRF Flanges
|
- •Nimonic 80 SWRF Flanges
- •UNS N07080 SWRF Flanges
- •ASTM B637 Nimonic 80 SWRF Flanges
- •ASME SB637 Nimonic Alloy 80 SWRF Flanges
|
- •Nimonic 80 SORF Flanges
- •UNS N07080 SORF Flanges
- •ASTM B637 Nimonic 80 SORF Flanges
- •ASME SB637 Nimonic Alloy 80 SORF Flanges
|
- •Nimonic 80 Reducing Flanges
- •UNS N07080 Reducing Flanges
- •ASTM B637 Nimonic 80 Reducing Flanges
- •ASME SB637 Nimonic Alloy 80 Reducing Flanges
|
- •Nimonic 80 Flat Flanges
- •UNS N07080 Flat Flanges
- •ASTM B637 Nimonic 80 Flat Flanges
- •ASME SB637 Nimonic Alloy 80 Flat Flanges
|
| DIMENSIONS OF Nimonic 80 Flanges: |
| EQUIVALENT GRADES OF Nimonic 80 Flanges : |
| STANDARD |
WERKSTOFF NR. |
UNS |
GOST |
AFNOR |
JIS |
BS |
EN |
| Nimonic 80 |
2.4631 |
N07080 |
НП-2 |
- |
NW 10665 |
NA 12 |
NLC-Ni 99 |
| MECHANICAL PROPERTIES OF Nimonic 80 Flanges : |
| Density |
Melting Point |
Tensile Strength |
Yield Strength (0.2%Offset) |
Elongation |
| 8.9 g/cm3 |
1446 °C (2635 °F) |
Psi – 67000 , MPa – 462 |
Psi – 21500 , MPa – 148 |
45 % |
| Grade |
Ni |
Fe |
C |
Mn |
Si |
Cu |
Mg |
Ti |
S |
Nimonic 80
|
balance |
3.0 max |
0.10 max |
1.0 max |
1.0 max |
0.20 max |
- |
1.8-2.7 |
0.015 max |
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. We guarantee to give a response within 24hours(usually in the same hour)
5. You can get stock alternatives, mill deliveries with minimizing manufacturing time.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
Previous: Nimonic 80/80A Fitting
Next: Nimonic 90 tube
