Nimonic 115 Plate supplier, Nimonic 115 Polished Plate, Nimonic 115 Coil Suppliers in China, Nimonic 115 plate price in China, Nimonic Alloy 115 strip distributor, Nimonic 115 cold rolled plate stockist in China, Nimonic Alloy 115 Plate Stockist.
Nimonic 115 Plate and Nimonic 115 Sheet are made up of nickel and chromium. Nimonic 115 Coil is similar to NIMONIC alloy 105 plate but has higher levels of aluminium and titanium for increased strengthening by precipitation hardening. The alloy has high strength and creep resistance at temperatures to about 1850°F (1010°C). Nimonic 115 Rolling Sheets mainly suitable to use for as gas turbine combustion chambers, afterburner parts and heattreatment furnace equipment. turbine blades in aircraft gas turbines. Nimonic 115 Clad Plate from Special Metals is a NIMONIC ® alloy, available in the following form including Nimonic 115 Flat Sheet, Nimonic Alloy 115 Plate, Nimonic 115 Rolling Plate, Nimonic 115 Flat Shim, Nimonic 115 Perforated Plate, Nimonic 115 Hot rolled Plate etc. These Nimonic 115 Cold rolled Plates and Alloy 115 Plate with 100% ultrasonic test according to EN102768-3, SA388, ASTM A520-1974, Sep 1921 C/c etc..
| NIMONIC 115 PLATE SPECIFICATION: |
| Nimonic 115 Sheet ASTM Specification |
ASTM B463 UNS , ASME SB463 |
| Nimonic Alloy 115 Plate Specification |
MSRR, AMS, BS, ASTM B463 / ASME SB463 |
| Nimonic 115 Plate Length& Sizes |
1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2m, 2.44m, 3m, 36″ X 120″ or 48″ X 144″, Cut to size available |
| Nimonic 115 Plate Thickness |
0.1mm to 100 mm Thk |
| Nimonic 115 Plate Width |
10-2500mm |
| Nimonic 115 Sheet AMS |
AMS |
| Nimonic 115 Sheet Hardness |
Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Temper |
Annealed |
| Condition |
Polished on both sides |
| Nimonic 115 Plate Finish |
Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Nimonic 115 Plate Stock in form of |
Nimonic Alloy 115 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
| Nimonic 115 Plate Dimensions |
As the customer required |
| High Quality Nimonic 115 Sheet |
- Huge Stock, Timely delivery
- Raw Materials Certificate
- EN 10204/3.1B
- 100% Radiography Test Report
- High special strength, high melt point
- Third Party Inspection Report, etc
- Excellent corrosive resistance, good thermal resistance
- Customer support after-sales service
- Strict Control from Raw Material to Finished Nimonic 115 plate
|
| Nimonic 115 profiling |
To provide a full profiling service we use numerous profiling methods including:
- Plasma Plate Cutting
- Laser Plate Cutting
- Oxy-propane Flame Cutting
|
| Specialized in |
- Nimonic 115 Sheet: material under 3/16″ [5.00 mm] in thickness and 24″ [600 mm] and over in width
- Nimonic 115 Plate: material 3/16″ [5.00 mm] and over in thickness and over 10″ [250 mm] in width
- Nimonic 115 Strip: cold-rolled material under 3/16″ [5.00 mm] in thickness and under 24″ [600 mm] in width
- Nimonic 115 Clad plate: Nimonic 115 Clad plate is a composite steel plate made by bonding Nimonic 115 plate, etc.
- Free Quote, Inquiry answered within 8 hours
|
| Nimonic 115 Plate Equivalent Grades: |
| Alloy Name |
Trade Name |
UNS No. |
British Specs |
American Specs |
German Specs |
French Specs |
| Alloy 115 |
Nimonic 115 |
|
BS HR4 |
|
WS 2.4636 |
AFNOR NCK 15ATD |
| Nimonic 115 Plate chemical composition: |
| Element |
Content (%) |
| Nickel, Ni |
54 |
| Chromium, Cr |
14.0-16.0 |
| Cobalt, Co |
13.0-15.5 |
| Aluminum, Al |
4.50-5.50 |
| Molybdenum, Mo |
3.0-5.0 |
| Titanium, Ti |
3.50-4.50 |
| Iron, Fe |
1.0 |
| Manganese, Mn |
1.0 |
| Silicon, Si |
1.0 |
| Copper, Cu |
0.20 |
| Zirconium, Zr |
0.15 |
| Carbon, C |
0.12-0.20 |
| Sulfur, S |
0.015 |
| Boron, B |
0.010-0.025 |
| Nimonic 115 Plate physical properties: |
| Properties |
Metric |
Imperial |
| Density |
7.85 g/cm³ |
0.284 lb/in³ |
| Melting point |
1304°C |
2380°F |
| Nimonic 115 Plate mechanical properties |
| Properties |
Metric |
Imperial |
| Tensile strength (precipitation hardened, value at room temperature) |
1300 MPa |
189000 psi |
| Yield strength (precipitation hardened, value at room temperature, @strain 0.200%) |
850 MPa |
123000 psi |
| Elongation at break (precipitation hardened) |
25.00% |
25.00% |
Nimonic 115 Plate Welding
Welding techniques recommended for Nimonic 115™ include gas-tungsten arc welding, gas metal-arc welding, submerged-arc welding and shielded metal-arc welding.
APPLICATIONS:
Sasa alloy’s Nimonic 115 plate are suitable for Aerospace, Plant manufacturing, Machine engineering, Power generation and Nuclear Power Plant etc. We are supplying high quality Nimonic 115 Sheet to our clients globally.
Previous: Nimonic 105 Sheet Plate
Next: Nimonic 263 Sheet Plate
