ASTM B160 Nickel 200 UNS N02200 Round Bar

Short Description:

Nickel 200 (UNS N02200 / W.Nr. 2.4066) round bar and rod are supplied as commercially pure wrought nickel with good mechanical properties, thermal and electrical conductivity, and resistance in many caustic and neutral environments. Dimensions, condition, testing and documentation are reviewed before quotation. Final suitability depends on the medium, concentration, temperature, stress, fabrication route and governing design code. Nickel 200 Round Bar Specification Alloy /…

Grade:: Nickel 200 – UNS N02200
Standard:: ASTM B160
Surface:: Bright, Polish, Bright, Rough Turned
Diameter:: 3mm~800mm

Send email to us

Product Detail

Product Tags

Nickel 200 (UNS N02200 / W.Nr. 2.4066) round bar and rod are supplied as commercially pure wrought nickel with good mechanical properties, thermal and electrical conductivity, and resistance in many caustic and neutral environments. Dimensions, condition, testing and documentation are reviewed before quotation.

Final suitability depends on the medium, concentration, temperature, stress, fabrication route and governing design code.

Nickel 200 Round Bar Specification

Alloy / UNS	Nickel 200 / N02200
Werkstoff / EN	2.4066 / Ni 99.2
Product standard	ASTM B160 / ASME SB-160
Forms	Round bar, rod, bright bar, peeled bar, ground bar and cut pieces
Diameter	Common supply range 6–200 mm; other sizes subject to mill capability
Condition	Hot finished, cold finished, annealed or solution treated, peeled, ground or polished as specified
Documentation	Material test certificate and heat-number traceability as ordered

Available Bar Forms and Processing

Form	Processing	Order information
Hot-finished bar	Hot worked, heat treated and descaled or turned	Size, allowance, surface and inspection
Cold-finished bar	Cold drawn, peeled, ground or polished	Tolerance, straightness and roughness
Cut pieces	Sawn or machined blanks	Length tolerance, marking and traceability

Equivalent Designations

Commercial designation	UNS	Werkstoff	EN designation
Nickel 200	N02200	2.4066	Ni 99.2

Chemical Composition

Ni + Co	Cu	Fe	Mn	C	Si	S
99.0 min	0.25 max	0.40 max	0.35 max	0.15 max	0.35 max	0.010 max

Values are weight percent; final acceptance follows the ordered standard edition and material test certificate.

Mechanical and Physical Properties

Property	Value / requirement	Purchasing note
Tensile strength	Confirm to ASTM B160 by size and condition	Confirm ordered size and condition
Yield strength	Confirm to ASTM B160 by size and condition	Confirm ordered size and condition
Elongation	Reported on the material test certificate	Confirm ordered size and condition
Density	Approx. 8.89 g/cm³	Confirm ordered size and condition

Heat Treatment, Machining and Fabrication

Heat treatment	Condition and cooling practice follow the governing specification and required properties.
Machining	Use suitable tooling and positive feeds; state machining allowance and final surface.
Welding / fabrication	Use qualified procedures and compatible consumables selected for the service condition.
Clean handling	Avoid contamination for corrosion-critical and high-purity applications.

Inspection and Quality Documentation

Identity	Heat number and PMI when ordered
Tests	Chemical and mechanical results on the material test certificate
Dimensions	Diameter, length, straightness and surface inspection
NDT	Ultrasonic or other testing subject to order requirements

Nickel 200 Round Bar Applications

Nickel 200 round bar industrial applications

Industry	Components	Selection focus
Chemical processing	Caustic-handling shafts, fasteners and machined parts	Resistance in many alkaline and neutral media
Electrical equipment	Conductive components and terminals	High nickel content and electrical conductivity
Food processing	Machined and fabricated components	Cleanability and corrosion resistance in suitable media

Nickel 200 Round Bar Packaging

Bars are protected according to size, surface, package weight, route and customer specification.

Wooden export packing for Nickel 200 round bar

Condition	Protection	Confirmation
Hot-finished	Bundle, skid or wooden support	Weight and lifting points
Ground / polished	Separators and waterproof wrapping	Surface and moisture protection
Cut pieces	Blocked wooden case	Count and traceability

Procurement Confirmation

State Nickel 200 / UNS N02200, standard edition, diameter, length, quantity, condition, tolerance, surface, testing, marking, packing and certificate requirements.