GH4033 Nickel-Based High-Temperature Alloy Bar
It exhibits ample high-temperature strength within the range of 700 to 750 degrees Celsius and demonstrates good oxidation resistance below 900 degrees Celsius. The alloy boasts excellent heat performance and is primarily supplied in the form of hot-rolled rods and blanks, finding applications in engine rotor components.
| Specifications of GH4033 Nickel-Based High-Temperature Alloy Bar: |
| Grade | GH4033 |
| Standard | GB/T14992(2005) |
| Diameter / Cross-section | 4 mm to 400 mm diameter; other bar sections subject to inquiry |
| Length | Required cut length or mill length |
| Finish | Hot rolled(HR), Cold rolled(CR) |
| Form | Flat,Square,Hex,Round |
| Type Of GH4033 Nickel-Based High-Temperature Alloy Bar: |
|
|
|
|
| GH4033 Flat Bar | GH4033 Hex Bar | GH4033 Rods |
|
|
|
|
| GH4033 Round Bar | Gh4033 Bright Bar | GH4033 Ingogt Bar |
| CHEMICAL COMPOSITION OF GH4033 bar: |
| Grade | C | Mn | Si | S | Ce | Fe | Ni | Cr | P | Ti | Al | B |
| GH4033 | 0.03-0.08 max | 0.35 max | 0.65 max | 0.07max | 0.01 max | 4.00 | Remainder | 19.00 – 22.00 | 0.015 | 2.4-2.8 | 0.60-1.0 | 0.01 |
| GH4033 Mechanical Property Confirmation | |
| Required condition | State the heat-treatment condition and service requirement with the inquiry. |
| Acceptance values | Tensile strength, proof strength, elongation and hardness are confirmed against the applicable purchase specification, bar size and heat-treatment condition. |
| Documentation | Material certificate and requested inspection records are supplied as agreed in the order. |
| Why Choose Us: |
1. You can get the perfect material according to your requirement at the least possible price. 2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical. 3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement) 4. We guarantee to give a response within 24hours(usually in the same hour) 5. SGS or TÜV inspection can be arranged when specified in the order. 6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations. 7.Provide one-stop service.
| Packing: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. 2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as
