GH4033 Nickel Alloy Sheet and Plate
The average grain size of GH4033 alloy is closely related to the degree of deformation and final forging temperature of the forging. The alloy can be welded by argon arc in the solid solution state, and it should be processed in time after welding to eliminate the welding stress. Surface treatment process: The mechanically processed parts need to be electrolytic polished. If mechanical polishing is used, the final polishing and wear marks should be consistent with the length direction of the blade. The heating rate for solution treatment of parts should not be too fast, and a stepped heating curve can be used.
| GH4033 Nickel Alloy Sheet and Plate Specifications: |
Values shown are typical reference data. Acceptance requirements must be confirmed against the applicable purchase specification, thickness and heat-treatment condition, and verified by the material certificate.
| Grade | GH4033 |
| Standard | GB/T14992 |
| Thickness | 0.1mm To 100 mm |
| Size | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Finish | Hot rolled or cold rolled; heat treated, pickled, ground or polished as specified |
| Form | Sheets, Plates |
| CHEMICAL COMPOSITION OF GH4033 SHEET AND PLATE: |
| Grade | C | Mn | Si | S | Fe | Ni | Ti | Cr | Al | B | P | Ce |
| GH4033 | 0.03-0.08 | 0.35 | 0.65 | 0.007 | 4.0 | remainder | 2.4-2.8 | 19.00 – 22.00 | 0.6-1.0max | 0.01max | 0.015 | 0.01 |
| GH4033 Sheet and Plate Typical Mechanical Properties: |
| Material | Density g/cm3 | Melting point ℃ | Yield strength 0.2%(MPa) | Tensile Strength(MPa) | Elongation (%) | Hardness HBS |
| GH4033 | 8.2 | 1278-1346 | 590 | 880 | 13 | ≤321 |
| Why Choose Us: |
1. You can get the perfect material according to your requirement at the least possible price. 2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical. 3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement) 4. We aim to respond to complete inquiries within one business day. 5. SGS or TÜV inspection can be arranged when specified in the order. 6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations. 7.Provide one-stop service.
| SASA ALLOY'S Quality Assurance: |
1. Visual Dimension Test 2. Mechanical examining like tensile, Elongation and reduction of area. 3. Impact analysis 4. Chemical examination analysis 5. Hardness test 6. Pitting protection test 7. Penetrant Test 8. Intergranular Corrosion Testing 9. Roughness Testing 10. Metallography Experimental Test
| Packing: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
GH4033 Nickel Alloy Sheet and Plate Product Images
These product images show GH4033 Nickel Alloy Sheet and Plate form, surface condition and workmanship for visual verification before shipment.
\n
