ERNiCr-3 is suitable for joining various nickel alloys, including Inconel 600 and Inconel 601. This type of welding wire is often employed in applications such as aerospace, chemical processing, and marine engineering, where resistance to extreme environments is crucial.
| Specifications of ERNiCr-3 Welding Wire: |
| Grade |
ERNiCr-3 |
| Standard |
AWS A5.14 |
| Size |
0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM |
| Diameter |
10 mm To 100 mm or as per client requirement |
| Types |
Welding Wire |
| Surface |
Polished bright, Smooth |
| Technology |
Cold Rolled, hot rolled |
| Equivalent Grades Of ERNiCr-3 Wires: |
| STANDARD |
ESAB |
UNS |
Special Metals |
Oxford Alloys |
SANDVIK |
BOHLER |
UTP |
| ERNiCr-3 |
OK TIGROD NICR-3 |
N06082 |
INCONEL FILLER METAL 82 |
Alloy 82 |
EXATON NI 72HP |
BOHLER THERMANIT NICRO 82 |
UTP 068HH /td> |
| CHEMICAL COMPOSITION OF ERNiCr-3 Wire: |
| Grade |
C |
Mn |
Fe |
P |
Si |
S |
Ni |
Cu |
Ti |
Cr |
| ERNiCr-3 |
0.10 |
2.5-3.5 |
3.0 |
0.03 |
0.50 |
0.015 |
67.0 |
0.5 |
0.75 |
18.0-22.0 |
| ERNiCr-3 Wires Mechanical Properties: |
| Tensile Strength |
Yield Strength 0.2% Proof |
Elongation (% in 50mm) (thick.>0.76mm) |
| 85,500 psi |
52,500 psi |
38% |
| Welding Positions Of ERNiCr-3 Wire: |
| SASA ALLOY'S Quality Assurance: |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
\n
Previous: GH4033 Nickel Alloy Pipe Tupe
Next: ERNiCrMo-4 Nickel Alloy Welding Wire
