ASTM B622 Hastelloy C-4 UNS N06455 Seamless Pipe and Tube

Hastelloy C-4 Seamless Pipe and Tube
Alloy C-4 is a low-carbon nickel-chromium-molybdenum alloy selected for aggressive chemical environments. Its metallurgical stability is useful where seamless pipe sections will be joined by welding during fabrication.
Use seamless pipe for a process line specified by nominal pipe size. Use seamless tube when the drawing calls out the actual outside diameter and wall, such as in a heat exchanger bundle. State the applicable dimensional reference and specification edition on the purchase order.
Specifications and Ordering Dimensions
| Material | UNS N06455 / W.Nr. 2.4610 |
|---|---|
| Manufacture | Seamless pipe or tube to ASTM B622. Specify the required ASME SB-622 edition where applicable. |
| Delivery condition | Solution annealed. State the required surface and cleanliness on the order. |
| Pipe | NPS ½, 1, 2, 3 and 4 are examples for size enquiries. Add schedule or exact wall, dimensional standard and length. |
| Tube | Order by actual OD × wall × length. For example, 19.05 mm OD × 1.65 mm wall × 6,000 mm illustrates the order format. |
| Ends and tolerances | Specify plain or beveled ends, cut-length tolerance, OD and wall tolerances, and whether wall is nominal or minimum. |
The dimensions above are enquiry references. Quote availability against the complete OD, wall, length and quantity combination.
Seamless Pipe and Tube Size Reference
Pipe by nominal size and schedule
Use this reference when the drawing calls for ASME B36.19 dimensions. Outside diameter and nominal wall thickness are in millimetres.
| NPS | DN | OD | 10S | 40S | 80S |
|---|---|---|---|---|---|
| ½ | 15 | 21.3 | 2.11 | 2.77 | 3.73 |
| ¾ | 20 | 26.7 | 2.11 | 2.87 | 3.91 |
| 1 | 25 | 33.4 | 2.77 | 3.38 | 4.55 |
| 1¼ | 32 | 42.2 | 2.77 | 3.56 | 4.85 |
| 1½ | 40 | 48.3 | 2.77 | 3.68 | 5.08 |
| 2 | 50 | 60.3 | 2.77 | 3.91 | 5.54 |
| 2½ | 65 | 73.0 | 3.05 | 5.16 | 7.01 |
| 3 | 80 | 88.9 | 3.05 | 5.49 | 7.62 |
| 4 | 100 | 114.3 | 3.05 | 6.02 | 8.56 |
ASTM B622 governs the seamless alloy product. ASME B36.19 is the dimensional reference when specified. Confirm the applicable edition, actual availability and design requirements for the ordered size.
Tube by actual outside diameter
| Actual OD | Nominal wall | Cut length |
|---|---|---|
| 12.70 mm | 1.24 mm | 3,000 mm |
| 19.05 mm | 1.65 mm | 6,000 mm |
| 25.40 mm | 2.11 mm | 6,000 mm |
Illustrative tube enquiry combinations. State whether the wall is nominal or minimum, along with OD, wall and length tolerances.
Hastelloy C-4 Chemical Composition
Published Alloy C-4 composition, in weight percent.
| Element | Reference, wt.% |
|---|---|
| Nickel (Ni) | Balance |
| Chromium (Cr) | 14.50–17.50 |
| Molybdenum (Mo) | 14.00–17.00 |
| Iron (Fe) | 3.00 max. |
| Cobalt (Co) | 2.00 max. |
| Manganese (Mn) | 1.00 max. |
| Titanium (Ti) | 0.70 max. |
| Silicon (Si) | 0.050 max. |
| Phosphorus (P) | 0.020 max. |
| Sulfur (S) | 0.010 max. |
| Carbon (C) | 0.009 max. |
Reference: VDM Metals Alloy C-4 datasheet, Table 2. Use the ordered ASTM B622 edition and the mill test certificate for acceptance.
Typical Physical Properties
| Property | Typical value | Condition |
|---|---|---|
| Density | 8.60 g/cm³ | 20 °C |
| Melting range | 1,335–1,380 °C | Material reference |
| Elastic modulus | 211 GPa | 20 °C |
| Thermal conductivity | 10.1 W/(m·K) | 20 °C |
| Specific heat capacity | 408 J/(kg·K) | 20 °C |
Reference: VDM Metals Alloy C-4 datasheet, physical properties and Table 3. Use project design data for allowable temperature and pressure.
Applications of C-4 Seamless Pipe and Tube
| Application | Typical component and selection considerations |
|---|---|
| Chemical process piping | Transfer lines for selected contaminated mineral acids. Evaluate acid concentration, impurities, temperature and the condition of field welds. |
| Pickling acid regeneration | Acid feed and return piping. Include chloride content and normal and upset temperatures in the material review. |
| Acetic acid production | Process transfer piping and equipment connections. Specify process chemistry, pressure and fabrication requirements. |
| Corrosive heat exchanger service | Straight tubes for selected chemical duties. Check both fluid circuits, tube-sheet fit, wall tolerances and required examination. |
For projects comparing C-4 with C-276 or C-22, check the actual process chemistry and fabrication conditions against the project's material requirements.
Inspection and Material Traceability
Specify the ASTM or ASME edition and any supplementary inspection on the enquiry. Request the heat number, chemical and mechanical test results, dimensional inspection and the applicable hydrostatic or nondestructive examination records. State EN 10204 3.1 or third-party witnessing if your purchase order requires it.
Packing and End Protection
State packaging and end protection requirements when ordering. Include cut lengths, shipping method and any limits on bundle size or handling. Confirm the packing method on the quotation.
The blue-wrapped pipes in the gallery illustrate packaging.
Frequently Asked Questions
Does ASTM B622 cover Hastelloy C-4 seamless pipe and tube?
Yes. ASTM B622 lists UNS N06455 for seamless pipe and tube. Specify the required standard edition and size on the purchase order.
How do I specify a pipe versus a tube?
For pipe, give the NPS and schedule or specified wall thickness. For tube, give the actual OD, wall and length. Add the dimensional tolerances and end finish required by your drawing.
Can C-4 replace C-276 in an existing process line?
Review the service medium, temperature, pressure, fabrication and governing specification with your engineering team before approving a substitution.
What should I send to get a quote?
Send the size, quantity, lengths, ASTM or ASME edition, required tests and certificate type. Attach the drawing or project specification for special tolerances or inspection.


