Duplex Steel S32205 Strip
Duplex Steel S32205, also known as UNS S32205 or 2205 stainless steel, is a popular grade of duplex stainless steel characterized by its dual-phase microstructure, comprising both austenite and ferrite phases.Duplex Steel S32205 strips are suitable for use in the chemical and petrochemical industries, where they are employed in equipment like heat exchangers, pressure vessels, and pipelines due to their excellent resistance to corrosion by a wide range of chemicals and gases.S32205 duplex steel is commonly used in desalination plants, where it can withstand the corrosive effects of seawater during the desalination process.
| Specifications of Duplex Steel S32205 Strip: |
| Grade | S32205 |
| Standard | ASTM A240 |
| Thickness | 0.02 mm to 5 mm |
| Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | Annealed-pickled(soft), 1/4 hard, 1/2 hard, 3/4 hard & full hard (as rolled) etc. |
| Applications | Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry |
| EQUIVALENT GRADES OF S32205 Strip: |
| STANDARD | WERKSTOFF NR. | UNS |
| Duplex 2205 |
1.4462 | S32205 |
| CHEMICAL COMPOSITION OF S32205 Strip: |
| Grade | C | Mn | Si | S | Mo | Fe | Ni | Cr | P |
| S32205 |
0.03max | 2.0max | 1.0 max | 0.02max | 2.5-3.5 | 63.54 min |
4.5-6.5 | 21.0-23.0 | 0.03max |
| S32205 Strips Mechanical Properties: |
| Grade | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| S32205 |
7.805 g/cm3 | 1420-1465 | 620-800 MPa |
450-550 MPa |
35 % |
| Why Choose Us: |
1. You can get the perfect material according to your requirement at the least possible price.
2. We also offer Reworks, FOB, CFR, CIF, and door to door delivery prices. We suggest you to do deal for shipping which will be quite economical.
3. The materials we provide are completely verifiable, right from raw material test certificate to the final dimensional statement.(Reports will show on requirement)
4. We guarantee to give a response within 24hours(usually in the same hour)
5. Provide SGS TUV report.
6. We are fully dedicated to our customers. If it will not possible to meet your requirements after examining all options, we will not mislead you by making false promises which will create good customer relations.
7.Provide one-stop service.
| SASA ALLOY’S Quality Assurance (including both Destructive and Non-Destructive) : |
1. Visual Dimension Test
2. Mechanical examining like tensile, Elongation and reduction of area.
3. Impact analysis
4. Chemical examination analysis
5. Hardness test
6. Pitting protection test
7. Penetrant Test
8. Intergranular Corrosion Testing
9. Roughness Testing
10. Metallography Experimental Test
| Packing: |
1. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging.
2. Sasa alloy’s pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
