6082 HE30 Aluminium Plate
Aluminium 6082 HE 30 Plate has very good weldability but strength is lowered in the weld zone. When welded to itself, alloy 4043 wire is recommended. If welding 6082 to 7005, then the wire used should be alloy 5356.
EN AW-6082 HE30 Aluminium Plate is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). Aluminium Plate 6082, HE 30 is one of the more popular alloys in its series (alongside alloys 6005, 6061, and 6063), although it is not strongly featured in ASTM (North American) standards. Aluminium 6082 HE 30 Plate is typically formed by extrusion and rolling, but as a wrought alloy it is not used in casting.
6082 HE 30 Aluminium Plate ASTM B209, ASTM-B-209, EN573, and EN485 international standards. Aluminium 6082 HE 30 Plate, EN AW-6082 HE30 Aluminium Plate, Aluminium Plate 6082, HE 30
Sasa alloy is the leading manufacturer and exporter of 6082 HE 30 Aluminium Plate. Supplier of ASTM B209 6082 HE 30 Aluminium Plate from 0.5mm to 5mm Thick 1000mm x 1000mm to 2500mm x 1250mm Tempers manufactured in accordance with international standards ASTM B209, ASTM-B-209, EN573, and EN485, check 6082 HE 30 Aluminium Plate price. The general widths of 6082 HE 30 H16 Aluminum Plates are 1000mm, 1250mm and 1500mm, while common lengths are 2000mm, 2500 mm and 3000mm respectively. Wholesale Trader of 6082 HE 30 Commercial Aluminium Plate offered by Sasa alloy , China. Stockist of 6082 HE 30 Aluminium Plate, H32 6082 HE 30 Aluminium Stucco Plate, H38 Commercial 6082 HE 30 Aluminium Plate, ASME SB209 6082 HE 30 Aluminium Patterned Plate, 6082 HE 30 Mill Finish, 6082 HE 30 Aluminium Extruded Plate, 6082 HE 30 Aluminium Plate and 6082 HE 30 Aluminium Plate in China.
6082 HE 30 Aluminium Plate Suppliers in UNS A96082 HE 30 Aluminium Plate stockist in China, 6082 HE 30 Aluminium Corrugated Plate Suppliers in Best Price of EN AW 6082 HE 30 H14 Aluminium Plate
You may intrested in:
- 6082 HE 30 Aluminium Chequered Plate
- 6082 HE 30 Aluminium Checker Plate
- 6082 HE 30 Aluminium Diamond Plate
- 6082 HE 30 Aluminium Tread Plate
Standard Dimensions of 6082 HE 30 Aluminium Plate
Standard dimensions (a x b) of Aluminium 6082 HE 30 Plate
Aluminium 6082 HE 30 Plate up to 9.9 mm 2.000 x 1.000 mm 2.500 x 1.250 mm 3.000 x 1.500 mm
Oversize Aluminium 6082 HE 30 Plate 4.000 x 2.000 mm 6.000 x 2.500 mm 8.000 x 2.500 mm
Other dimensions on request
6082 HE 30 Aluminium Plate Suppliers in China, 6082 HE 30 Aluminium Plate Supplier Singapore, Dealer & Distributor of All 6082 HE 30 Aluminium Alloy Plate Grades, Stockholder of 6082 HE 30 Aluminium Plate 1mm, Wholesaler of Aluminium Plate Grade 6082 HE 30
| Aluminium Alloy | ASTM B209 6082 HE 30 |
| Aluminium 6082 HE 30 Plate Temper | O, H12, H14, H16, H18, H22, H24, H26, H32, H112 |
| Aluminium 6082 HE 30 Plate Thickness | 0.5mm-150mm |
| Aluminium 6082 HE 30 Plate Width | 500-2000mm |
| Aluminium 6082 HE 30 Plate Length | to clients’ requirement |
| Aluminium 6082 HE 30 Plate Coating | Polyester, Fluorocarbon, polyurethane and epoxy coating |
| 6082 HE 30 Aluminium Plate Coating finish | PVDF, POLYESTER(PE) |
| Aluminium 6082 HE 30 Plate Surface | Polished, hair line, brush, sand blast, checkered, embossed, etching, etc. Mill finish, Bright finish, paper interleaved, one side film, both sides film. |
| Aluminium 6082 HE 30 Plate Gloss | Meet the customer requirement |
| Total coating thickness of Aluminium 6082 HE 30 Plate | PVDF coating: More than 25 micron; Polyester coating: More than 18 micron |
| Aluminium 6082 HE 30 Plate Coating hardness | (pencil hardness) more than 2H |
| Aluminium 6082 HE 30 Plate Coating adhesive | No lower than1st grade |
| Aluminium 6082 HE 30 Plate Impact resistance | No cracking or peeling (50kg/cm, ASTMD-2794: 1993) |
| Aluminium 6082 HE 30 Plate Flexibility (T-bend) | 2T |
| Aluminium 6082 HE 30 Plate MEK resistance | More than 10 |
| Available Aluminium 6082 HE 30 Plate Stock Sizes | 1ft x 1ft, 1ft x 2ft, 1ft x 4ft, 2ft x 2ft, 2ft x 4ft, 4ft x 4ft, 4ft x 8ft, 4ft x 10ft or Cut to Size or Custom Shape. |
| Aluminium 6082 HE 30 Plate Delivery Time | 30-60 days after receiving the prepayment |
| Aluminium 6082 HE 30 Plate Packaging Details | Standard export package. One pallet is about 2-3 ton.Two steel belts in width and three in width. One 20GP container can load about 18-20 tons Aluminium 6082 HE 30 Plate. One 40GP container can load about 24 tons Aluminium 6082 HE 30 Plate |
| ASTM B209 Alloy 6082 HE 30 Plate Outer packing | Export standard, wooden pallet |
| Bottom side Aluminium 6082 HE 30 Plate is coated with protective polyester material, thickness more than 6 micron | |
| We Export Aluminium 6082 HE 30 Plate to | Singapore, Indonesia, Ukraine, Korea, Thailand, Vietnam, Saudi Arabia, Brazil, Spain, Canada, USA, Egypt, Iran, China, Kuwait, Dubai, Oman, Kuwait, Peru, Mexico, Iraq, Russia, Malaysia, etc. |
| AUTHORIZED DISTRIBUTORS OF , NALCO, , THYSSENKRUPP, VIRGO, MANKASIA AND METENERE | |
Types of 6082 HE 30 Aluminium Plate Manufacturer in China
Standard Specification of 6082 HE 30 Aluminium Plate
Standards and specifications by country
| EN AW-6082 | HE30 | AA 6351 | DIN AlMgSi1 | AlSi1MgMn | IS 64430 | B51S |
| Specification | Alloy | Temper | Company |
|---|---|---|---|
| Europe | |||
| BS L113 | 6082 | T4, T6 | |
| European Standard | BS (OLD) | USA (AA) | GERMANY (DIN) | ISO | IS | Canadian |
|---|---|---|---|---|---|---|
| EN AW-6082 | HE30 | 6351 | AlMgSi1 | AlSi1MgMn | 64430 | B51S |
6082 HE 30 Aluminium Plate Equivalent Grades
| China | U.S.A. | BRITAIN | CANADA | GERMANY | RUSSIA | I.S.O. | FRENCH | |
|---|---|---|---|---|---|---|---|---|
| New IS | Old IS | (A.A.) | (B.S.) | (DIN) | – | – | – | |
| 64430 | H30 | 6351 | H30 | B51S | Al-Mg-Si 1 | AV | Al-Si-1 Mg Mn | 6082 |
| 6082 | 6082 | Al-Mg-Si 1 | – | – | – | |||
6082 HE 30 Aluminium Plate Sizes
| Sizes (mm) | Theoretical Mass KG/Plate |
|---|---|
| 2000 X 1000 X 0.5 | 2500 X 1250 X 0.5 |
| 2000 X 1000 X 0.7 | 2500 X 1250 X 0.7 |
| 2000 X 1000 X 0.9 | 2500 X 1250 X 0.9 |
| 2000 X 1000 X 1.2 | 2500 X 1250 X 1.2 |
| 3000 X 1500 X 1.2 | 2000 X 1000 X 1.6 |
| 2500 X 1250 X 1.6 | 3000 X 1500 X 1.6 |
| 2000 X 1000 X 2.0 | 2500 X 1250 X 2.0 |
| 3000 X 1500 X 2.0 | 2500 X 1250 X 2.5 |
| 2.79 | 4.36 |
| 3.91 | 6.10 |
| 5.02 | 7.85 |
| 6.74 | 10.46 |
| 15.01 | 8.93 |
| 13.95 | 20.09 |
| 11.16 | 17.44 |
| 25.11 | 21.80 |
6082 HE 30 Aluminium Plate Weight Chart
Width: 1.000 mm | Length: 2.000 mm
| Product | Thickness | Weight |
|---|---|---|
| 6082 HE 30 Aluminium Plate | 0,30 mm | 0,810 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 0,40 mm | 1,080 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 0,50 mm | 1,350 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 0,60 mm | 1,620 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 0,70 mm | 1,890 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 0,80 mm | 2,160 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 0,90 mm | 2,430 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 1,00 mm | 2,700 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 1,20 mm | 3,240 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 1,40 mm | 3,780 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 1,50 mm | 4,050 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 1,60 mm | 4,320 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 1,80 mm | 4,860 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 2,00 mm | 5,400 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 2,20 mm | 5,940 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 2,50 mm | 6,750 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 3,00 mm | 8,100 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 4,00 mm | 10,800 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 5,00 mm | 13,500 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 6,00 mm | 16,200 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 10,00 mm | 27,000 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 12,00 mm | 32,400 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 15,00 mm | 40,500 Kg/m2 |
| 6082 HE 30 Aluminium Plate | 20,00 mm | 54,000 Kg/m2 |
6082 HE 30 Aluminium Plate Chemical Composition
| Alloy | % Si | % Mg | % Mn | % Cu | % Fe | % Cr | % Zn | % Ti | % Others | % Al |
|---|---|---|---|---|---|---|---|---|---|---|
| EN AW-6082 | 0.70 – 1.30 | 0.60 -1.20 | 0.40 – 1.00 | 0.10 Max | 0.50 Max | 0.25 Max | 0.20 Max | 0.10 Max | – | Remainder |
Aluminium 6082 HE 30 Plate Mechanical Properties
| Alloy | Temper | UTS (Mpa) | Yield Strength (Mpa) | Elongation (%) | ||
|---|---|---|---|---|---|---|
| Minimum | Maximum | Minimum | Maximum | A 50mm (Minimum) | ||
| EN AW-6082 | O | – | 160 | – | 110 | 12 |
| T4 | 205 | – | 110 | – | 12 | |
| T5 | 270 | – | 230 | – | 6 | |
| T6 | 290 | – | 250 | – | 6 | |
| Alloy Designation | UK Specifications | US Specifications | US Federal Specifications | European Specifications | Other |
|---|---|---|---|---|---|
| 6082 A96082 | BS L111 Alloy 6082-T6 BS L112 Alloy 6082 BS L113 Alloy 6082-T6 BS L114 Alloy 6082-T6 BS L115 Alloy 6082-T651 Plate BS HE30 6082 Extrusions BS HP30 6082 Plate BS HT30 6082 BS HG30 6082 BS HS30 6082 | WS 3.2315 EN 2326 6082-T6 EN 2636 6082-T6 EN 4273 EN 4274 (with peripheral coarse grain control) | Alcoa-920 Birmetal-071 BA 25 Durcilium-S Hiduminium-44 Anticorodal-090 AlMgSi1Mn A-SGM0.7 AECMA 2389 AECMA 2390 UNI 3571 UNI 9006/4 L-3453 |
Aluminum Alloy Heat Treatment Temper Designations
Basic Aluminum Heat Treatment Designations
- F As Fabricated
- O Annealed
- H Strain Hardened
- W Solution Heat Treated
- T Solution Heat Treated
Heat Treating T Temper Codes for Aluminium 6082 HE 30 Plates
- T1 – Cooled from an elevated temperature shaping process and naturally aged to a substantially stable condition.
- T2 – Cooled from an elevated temperature shaping process, cold worked, and naturally aged to a substantially stable condition.
- T3 – Solution heat treated, cold worked, and naturally aged to a substantially stable condition.
- T4 – Solution heat treated, and naturally aged to a substantially stable condition.
- T5 – Cooled from an elevated temperature shaping process then artificially aged.
- T6 – Solution heat treated then artificially aged.
- T7 – Solution heat treated then overaged/stabilized.
- T8 – Solution heat treated, cold worked, then artificially aged.
- T9 – Solution heat treated, artificially aged, then cold worked.
- T10 – Cooled from an elevated temperature shaping process, cold worked, then artificially aged.
Additional digits may be used after the first T temper digit to indicate subsequent stress relieving by processes such as stretching, compressing, or a combination.
H Temper Strain Hardening Codes for Aluminium 6082 HE 30 Plates
- H1 – Strain hardened only
- H2 – Strain hardened and partially annealed
- H3 – Strain hardened and stabilized
- H4 – Strain hardened and lacquered or painted. This assumes that thermal affects from the coating process affect the strain hardening; seldom encountered.
6082 HE30 Packing Information of Aluminum plate :
Application of 6082 HE 30 Aluminium Plate
6082 HE 30 Aluminium Plate is the most widely used form of Industrial Aluminium. 6082 HE 30 Aluminium Plates find applications in various industries such as manufacturing cans and packages, transportation, home appliances, building and construction.
